The Maintenance Mechanic position performs preventive and corrective maintenance in the plant under management supervision.

Essential Duties/Responsibilities

Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time.

• Performs all phases of maintenance, including electrical and mechanical systems (i.e. fabricating, welding troubleshooting, repairing, installing, and performing required preventative maintenance).
• Understand the mill flow and mill schematics.
• Maintains all equipment in good working condition.
• Follows preventative maintenance schedule.
• Able to perform routine services and troubleshoot and repair all mill equipment.
• Maintains clean, neat, and orderly work area at all times.
• Assists personnel on special fabrication and construction projects.
• Performs machine repair and installation such as replacing motors, rebuilding gearboxes, running threaded piping, running weld piping, replacing belting, replacing bearings, and welds, and uses a cutting torch.
• Conducts daily greasing and oiling of plant equipment as needed.
• Diagnoses and replaces equipment parts with little or no direction.
• Communicates well with operators and management.
• Responsible for using assigned personal protective equipment and required safety equipment; responsible for being familiar with and observing all Company safety rules and regulations.
• Attends regularly scheduled safety meetings and may be asked to serve on Safety Committee.
• All other duties as assigned.

Minimum Qualifications

• High school diploma or GED equivalent.
• 2 years minimum experience with pellet mills/feed mill equipment.
• Forklift experience.
• Welding proficiency in MIG and Stick.

Preferred Qualifications

• Vocational school training preferred.
• Experience involving/using CPM 7000 series.
• CMMS experience.
• Ability to diagnose and repair control circuits and VFD installation preferred.

Physical Demands

• Frequently required to push, pull, move or lift up to 100 lbs.
• Frequently required to walk, stand, climb, balance, stoop, kneel, crawl, and crouch.
• Regularly required reach with hands and arms.
• May be asked to travel to other plants for construction projects.
• May need to work nights and weekends; available "on call" as needed.

Work Environment

Job functions will be carried out in a feed mill facility which requires tolerance for dusty environments and high heat or cold temperatures.